Skip to content
PRODUCTS

Machines for a Complete
Biomass Pellet Plant

From bale handling and shredding to grinding and pelletizing, every TRIO machine is designed and built in-house in Jaipur to run as one line: consistent pellets, less downtime and faster payback.

8Machines in 3 categories + spares
1–20TPHCapacity range
6–16mmPellet diameters
50+Plants installed in India

01
Category 01

Main Process Machines

Shred, grind and pelletize: the three machines at the heart of every TRIO pellet plant.

3 machines
TRIO Vertical Ring Die Pellet Machine01★ Flagship
Pelletizing

Vertical Ring Die Pellet Machine

Built for performance. Made to last.

Compresses processed biomass into high-density fuel pellets using a vertical ring die. Runs continuously, turning agro-waste into clean fuel for boilers, industries and power plants.

Capacity*
1.0 – 4.0 TPH
Motor power
90 – 250 kW
Pellet size
6 – 16 mm
Models
560 · 700 · 850
  • SS X46Cr13 ring die
  • Gravity feed
  • Welded rollers
  • Agro + wood

* Output depends on material type, moisture and density. 5 models from TRIO560 (90 kW) to TRIO850 (250 kW).

TRIO Twin-Shaft Shredder Mill02
Size reduction

Twin-Shaft Shredder Mill

Low speed. High torque. Heavy duty.

Tears paddy straw bales, stalks and bulky agro residue into small, even pieces before the hammer mill. Auto overload reverse keeps it running through tough material.

Capacity*
5 – 20 TPH
Drive
Twin motors
Rotor speed
10 – 12 RPM
  • Hardox 500 cutters
  • EN-24 hex shaft
  • Auto reverse
TRIO High-Efficiency Hammer Mill03
Size reduction

High-Efficiency Hammer Mill

Fine, uniform, pellet-ready powder.

Grinds agricultural and forestry waste into fine, uniform material ready for pelletizing, with low heat build-up and long service life.

Capacity*
2 – 7 TPH
Motor power
75 – 200 kW
Models
5 sizes
  • Quick-open doors
  • Direct-coupled motor
  • Rigid frame
02
Category 02

Feeding & Bale Handling

Bring round bales in from the field and keep the line fed steadily, without manual loading.

2 machines
TRIO Trio Auto Feeding Unit04
Feeding

Trio Auto Feeding Unit

Steady feed. No manual loading.

A 24–30 ft container with a rotating belt that gives an uninterrupted supply to the next machine and removes stones before they cause damage.

Length
24 – 30 ft
Output speed
Adjustable
Stone removal
Built-in
  • Rotating belt
  • Stone separator
  • Less labour
TRIO Automatic Round Bale Trolley05
Bale handling

Automatic Round Bale Trolley

Lift. Load. Move.

Fully automatic hydraulic loading and unloading carries up to 15 round bales per trip, saving time, labour and cost from field to plant.

Capacity
Up to 15 bales
Size (L × W)
22 × 8 ft
Bale diameter
4 – 6 ft
  • Hydraulic
  • Paddy · wheat · maize
  • 10.00×16 tyres
03
Category 03

Supporting Plant Equipment

The machines that connect your line: making sawdust from wood waste and moving material from one stage to the next.

3 machines
TRIO Sawdust Making Machine06
Supporting equipment

Sawdust Making Machine

Wood waste to fine sawdust.

Turns offcuts, branches and chips into fine sawdust, ready for the hammer mill or pellet mill.

Input
Wood waste
Output
Fine sawdust
  • Offcuts
  • Branches
  • Chips
TRIO Z-Elevator07
Supporting equipment

Z-Elevator

Steep lift. Small footprint.

Lifts material to the next machine on a cleated belt, so it climbs steeply without slipping back. Saves floor space.

Belt
Cleated
Layout
Compact
  • Steep lift
  • No slip-back
TRIO Conveyor Belt08
Supporting equipment

Conveyor Belt

Connects your whole line.

Moves raw material and pellets between machines along the floor, with a feed hopper at the inlet. Sized to your layout.

Length
Custom
Inlet
Feed hopper
  • Raw material
  • Finished pellets
04
Category 04

Genuine Spare Parts

Ring dies, roller shells, roller assemblies, bearings and wear parts for the 560 model ring die pellet machine. 27 items in the full catalogue.

8 parts
TMSP-01TRIO Pellet Ring Die TMSP-01 for 560 model ring die pellet machine
Ring diePellet Ring DieSS X46Cr13Get Price
TMSP-02TRIO Pellet Ring Die TMSP-02 for 560 model ring die pellet machine
Ring diePellet Ring DieAlloy steel · 20CrMnTiGet Price
TMSP-04TRIO Roller Shell (Welded) TMSP-04 for 560 model ring die pellet machine
Roller shellRoller Shell (Welded)High grade weldGet Price
TMSP-05TRIO Roller Assembly (Welded) TMSP-05 for 560 model ring die pellet machine
Roller assemblyRoller Assembly (Welded)High grade weldGet Price
TMSP-06TRIO Roller Assembly (Teeth Head) TMSP-06 for 560 model ring die pellet machine
Roller assemblyRoller Assembly (Teeth Head)20CrMnTiGet Price
TMSP-07 / 08TRIO Roller Bearing 33120 TMSP-07 / 08 for 560 model ring die pellet machine
BearingRoller Bearing 33120Genuine top gradeGet Price
TMSP-10TRIO Roller Shell Shaft TMSP-10 for 560 model ring die pellet machine
ShaftRoller Shell ShaftMachined steelGet Price
TMSP-20TRIO Hammer Mill Blade TMSP-20 for 560 model ring die pellet machine
Hammer millHammer Mill BladeLong durabilityGet Price

Prices are ex-works Jaipur and exclude GST and transport. Send your machine model, and we will confirm the right part before dispatch.

Get full spares price list
One complete line

Where each machine fits in your plant

Raw material moves from the field to finished pellets through these stages. Click a stage to see the machine.

  1. 01CollectBale Trolley
  2. 02FeedAuto Feeder
  3. 03ShredShredder
  4. 04GrindHammer Mill
  5. 05MoveConveyor / Z-Elevator
  6. 06PelletizePellet Machine
Not sure which machines you need? Share your raw material and target TPH.Open Plant Configuration Guide
Quick compare

All machines at a glance

Indicative figures. Final output depends on material type, moisture content and density.

MachineStageCapacity*PowerWhat it doesModels
Ring Die Pellet MachinePelletizing1.0 – 4.0 TPH90 – 250 kWPresses powder into 6–16 mm pellets5
Twin-Shaft ShredderSize reduction5 – 20 TPH55 + 55 kWBales & stalks into small pieces2
Hammer MillSize reduction2 – 7 TPH75 – 200 kWGrinds to pellet-ready powder5
Auto Feeding UnitFeeding24 – 30 ft beltAdjustableSteady feed + stone removal—
Round Bale TrolleyBale handlingUp to 15 balesHydraulicField to plant bale transport1
Sawdust MakerSupporting——Wood waste into sawdust—
Z-Elevator / ConveyorMaterial handlingCustom—Moves material between machinesCustom
Made in-houseMachines and spare parts built at our own Jaipur facility.
Turnkey plantsOne supplier for the full line, layout and commissioning.
Installation & trainingOur engineers set up the plant and train your operators.
Service & genuine sparesFast dispatch of wear parts across India.
Get in touch

Get a quote for your machine or full plant

Tell us the machine, raw material and capacity you need. A TRIO engineer replies within one working day.

Request a Quote

Thanks! WhatsApp has opened with your details. Just press send.