Skip to content
Biomass Pellet Machine · Flagship

Vertical Ring Die Pellet Machine

Built for performance. Made to last.

An advanced pelletizing system that compresses processed biomass into high-density fuel pellets using a vertical ring die structure. It runs continuously and efficiently, turning agro-waste into clean, renewable fuel for boilers, industries and power plants.

Capacity*
1.0 – 4.0 TPH
Motor power
90 – 250 kW
Pellet size
6 – 16 mm
Models
560 · 700 · 850

Prefer to talk? +91 85059 02337

TRIO vertical ring die biomass pellet making machine
  • SS X46Cr13 Die
  • Gravity Feed
  • 6–16 mm Pellets
  • Agro + Wood
  • Welded Rollers
  • Up to 4 TPH
Product overview

One machine at the heart of your pellet plant

The TRIO vertical ring die pellet machine is the final and most important stage of a biomass pellet plant. Ground, conditioned biomass is fed from the top, pressed through a rotating ring die by heavy-duty rollers and cut into uniform fuel pellets.

It is built in-house by TRIO to run as one line with our shredders, hammer mills, conveyors and auto feeding units, and is available in three models (TRIO560, TRIO700 and TRIO850) with motor options from 90 to 250 kW.

  • Vertical gravity feed
  • SS X46Cr13 ring die
  • Welded roller assemblies
  • 6–16 mm pellet sizes
TRIO Renewable Engineering vertical ring die pellet machine
TRIO ring die pellet machine
TRIO ring die pellet machine on display at an exhibition
On the expo floor
TRIO biomass pellet machine being cleaned at the TRIO godown
At the TRIO godown
Key features

Engineered for continuous production

TRIO vertical ring die pellet machine with gravity feed01
Feeding

Vertical gravity feed

Material falls straight into the pressing chamber, so the die is loaded evenly and choke-ups are rare.

  • Gravity feed
  • Even die load
  • Fewer chokes
Close-up of the TRIO ring die pellet machine pressing chamber02
Pressing

Stainless steel ring die

X46Cr13 stainless-steel ring die built for abrasive agro residue, with holes sized to the pellet you want to sell. Dies for 6 to 16 mm pellets.

  • X46Cr13 SS
  • 6–16 mm dies
  • Wear resistant
TRIO ring die pellet machine with heavy-duty drive and roller assembly03
Rollers

Heavy-duty rollers

Welded roller shells and complete roller assemblies press the material through the die. Worn shells swap out fast, so the machine is back in production sooner.

  • Roller shells
  • Full assemblies
  • Quick swap
TRIO pellet plant running in Bathinda, Punjab04
Raw material

Agro residue and wood waste

Makes pellets from agro residue and wood waste once it is ground and brought to the right moisture: paddy straw, mustard husk, sawdust, groundnut shell and more.

  • Paddy straw
  • Mustard husk
  • Sawdust
  • Groundnut shell
Technical parameters

Choose the model for your output

5 models from TRIO560 to TRIO850.

ModelPowerCapacity (TPH)*Pellet sizeEnquiry
TRIO56090 kW1.0 – 1.56 – 12 mmEnquire
TRIO560132 kW1.5 – 2.06 – 12 mmEnquire
TRIO560160 kW2.0 – 2.56 – 12 mmEnquire
TRIO700160 kW2.5 – 3.06 – 12 mmEnquire
TRIO850250 kW3.0 – 4.06 – 16 mmEnquire

* Machine output depends on material type, moisture content and material density. Figures are indicative only.

How it works

From ground biomass to finished pellets

  1. 1

    Feed

    Ground, conditioned material drops into the pressing chamber by gravity, loading the die evenly.

  2. 2

    Press

    Rollers press the material through the holes of the rotating ring die.

  3. 3

    Bind

    Heat and pressure soften the natural lignin in the biomass, which binds the pellet without chemical binders.

  4. 4

    Cut

    Knives cut the pellets to length as they leave the die, ready for cooling and packing.

Where it fits in a complete pellet plant

  1. Shredder
  2. Hammer Mill
  3. Conveyor / Z-Elevator
  4. Auto Feeding Unit
  5. Ring Die Pellet Machine
  6. Cooling & Packing

Dry, fine materials like sawdust can skip the shredder.

Raw materials

Agro residue and wood waste

One machine, many raw materials. What changes is the preparation before the pellet machine.

6Common materials
10–15%Ideal moisture

Moisture matters. Wetter material needs a drying stage first, otherwise pellets come out soft or crack.

Paddy straw – raw material for biomass pellets
Shredder needed

Paddy straw

High silica and ash: hardened ring die and rollers are recommended for longer life.

  • Shredder
  • Hammer mill
  • Pellet machine

Tip: Plan for hardened dies and rollers and a regular wear-part check.

Wheat straw – raw material for biomass pellets
Shredder needed

Wheat straw

Light and bulky: a shredder plus steady auto-feeding keeps the mill loaded evenly.

  • Shredder
  • Hammer mill
  • Pellet machine

Tip: Keep the auto feeding unit steady so the die never runs empty.

Mustard husk – raw material for biomass pellets
Shredder needed

Mustard husk

Good fuel value; size reduction before pelletizing gives uniform pellets.

  • Shredder
  • Hammer mill
  • Pellet machine

Tip: Grind evenly in the hammer mill for a uniform pellet finish.

Cotton stalk – raw material for biomass pellets
Shredder needed

Cotton stalk

Woody and long: heavy-duty shredding is needed before the hammer mill.

  • Shredder
  • Hammer mill
  • Pellet machine

Tip: Use a heavy-duty shredder first – the stalks are woody and long.

Sawdust – raw material for biomass pellets
No shredder needed

Sawdust

Already fine: usually goes straight to the hammer mill, no shredder needed.

  • Hammer mill
  • Pellet machine

Tip: Check moisture and remove stones or metal before the hammer mill.

Groundnut shell – raw material for biomass pellets
No shredder needed

Groundnut shell

Shells can be hammer-milled directly into pellet-ready powder.

  • Hammer mill
  • Pellet machine

Tip: Shells can go straight to the hammer mill – no shredding stage.

Genuine spare parts

Keep your machine running

Spare parts shown fit the 560 model ring die pellet machine.

All spare parts
  • TMSP-01TRIO stainless steel X46Cr13 pellet ring die

    Pellet Ring Die

    Stainless steel · SS X46Cr13

    Ask price
  • TMSP-02TRIO alloy steel 20CrMnTi pellet ring die

    Pellet Ring Die

    Alloy steel · 20CrMnTi

    Ask price
  • TMSP-04TRIO welded roller shell

    Roller Shell (Welded Type)

    High grade weld

    Ask price
  • TMSP-05TRIO welded roller assembly

    Roller Assembly (Welded Type)

    High grade weld

    Ask price
  • TMSP-06TRIO teeth head roller assembly

    Roller Assembly (Teeth Head Type)

    20CrMnTi

    Ask price
  • TMSP-07 / 08TRIO roller bearing 33120

    Roller Bearing 33120

    High quality, genuine top grade

    Ask price
  • TMSP-10TRIO roller shell shaft

    Roller Shell Shaft

    Machined steel shaft

    Ask price
FAQ

Questions we hear every day

Not answered here? Ask our team on WhatsApp or call us.

How does a ring die pellet machine work?

Rollers press the ground material through holes in a rotating ring die. Heat and pressure soften the natural lignin in the biomass, which binds the pellet without chemical binders. Knives cut pellets to length as they come out.

Which raw materials can be made into pellets?

Most agricultural and wood residues: paddy and wheat straw, mustard husk, cotton stalk, groundnut shells, sawdust and more. Each material needs the right size reduction and moisture before pelletizing.

What moisture should the raw material have?

Most biomass pelletizes well at roughly 10–15% moisture. Wetter material needs a drying stage first, otherwise pellets come out soft or crack.

Which machines make up a complete pellet plant?

A typical line is shredder → hammer mill → conveyor / Z-elevator → autofeeder → ring die pellet machine, followed by cooling and packing. Dry, fine materials like sawdust can skip the shredder.

Do you supply spare parts?

Yes. Ring dies in stainless steel (X46Cr13), welded roller shells and complete roller assemblies are available from TRIO.

Do you handle installation and service?

Yes. TRIO manufactures the machinery and also provides installation, maintenance and consultancy for the complete plant.

How much does a ring die pellet machine cost?

It depends on the model, raw material, capacity and the rest of your plant line. Share your requirement and our team will send an exact quote.

Get a quote

Tell us your output. We will size the machine.

Share your model, raw material and location. Our team replies with the right configuration and price.

Opens WhatsApp with your details filled in. Just press send.