Skip to content
How It Works – Biomass Pellet Process | TRIO Renewable Engineering
Home  /  How It Works
How it works

From Field Residue to Bagged Pellets

Configuration guide →

Straw that would otherwise be burnt becomes clean biomass fuel — in five simple steps, with machines built in-house in Jaipur.

5Process stages
1–4 TPHPellet output per line
6–16 mmPellet diameter
0%Stubble burning
Step by step

Inside a TRIO Pellet Plant

Every stage is matched to the next, so material flows evenly from bale to bag — no bottlenecks, no wasted power.

Automatic round bale trolley in field
Machine: Automatic Round Bale Trolley
01

Collect

Straw is baled in the field instead of burnt.

After harvest, paddy and wheat straw is baled right in the field. The TRIO round bale trolley picks up and carries the bales to the plant — turning a pollution problem into raw material.

  • Works with paddy straw, wheat straw, mustard husk, sawdust and other agro-residue
  • Hydraulic loading — fewer labourers, faster field clearing
  • Bales are stored dry so moisture stays in the ideal range
15Bales per trip
22 × 8 ftTrolley size
4–6 ftBale diameter
View Round Bale Trolley →
TRIO twin-shaft shredder machine
Machine: Twin-Shaft Shredder
02

Shred

The shredder cuts the bales into small chips.

Whole bales go straight into the TRIO twin-shaft shredder via the auto feeding unit. Slow-turning, high-torque rotors tear them into uniform chips — no need to open bales by hand.

  • Low-RPM, high-torque design — less dust, less wear
  • Hardox 500 blades on the heavy-duty model
  • Auto feeding unit (24–30 ft belt) keeps the line running continuously
5–20 TPHCapacity
10–12Rotor RPM
55+55 kWS1200 motors
View Shredder Machine →
TRIO high-efficiency hammer mill
Machine: High-Efficiency Hammer Mill
03

Grind

The hammer mill turns the chips into fine powder.

Chips are conveyed into the TRIO hammer mill, where high-speed hammers and a sized screen reduce them to a fine, even powder — the right particle size for dense, strong pellets.

  • Even particle size = smoother pelletizing and less die wear
  • Reversible hammers for longer life
  • Models from 75 kW to 200 kW to match your pellet line
2–7 TPHCapacity
75–200 kWMotor
3 sizes65×100 to 100×160
View Hammer Mill →
TRIO vertical ring die pellet machine
Flagship: Ring Die Pellet Machine
04

Pelletize

The ring die presses the powder into pellets.

Powder drops vertically into the TRIO ring die. Rollers force it through the die holes under high pressure and heat; the natural lignin binds it — no chemicals added.

  • Vertical feeding — material spreads evenly, no blockages
  • Ring dies in SS x46Cr13 or 20CrMnTi for long life
  • Choose pellet size from 6 mm to 16 mm
1–4 TPHCapacity
90–250 kWMotor
560/700/850TRIO models
View Ring Die Pellet Machine →
Bagged TRIO biomass pellets
Output: Ready-to-sell pellets
05

Pack

Pellets are cooled, screened and bagged.

Hot pellets are cooled to harden them, screened to remove fines (which go back into the line), then conveyed by Z-elevator for bagging — ready for industries, boilers and power plants.

  • Cooling makes pellets hard and durable for transport
  • Fines are recycled — almost zero waste
  • Bags or bulk loading as per buyer need
CoolHarden
ScreenRemove fines
BagReady to sell
Talk to us about output →
Complete line

One Plant, Five Matched Machines

All machines are designed and built by TRIO, so capacities match end to end. Use the configuration guide to size your plant.

StageTRIO MachineWhat it doesCapacity / Size
01CollectAutomatic Round Bale TrolleyCarries bales from field to plantUp to 15 bales · 22 × 8 ft
02ShredAuto Feeding Unit + Twin-Shaft ShredderFeeds and cuts bales into chips5–20 TPH
03GrindHigh-Efficiency Hammer MillGrinds chips into fine powder2–7 TPH · 75–200 kW
04PelletizeRing Die Pellet MachinePresses powder into pellets1–4 TPH · 6–16 mm
05PackConveyor, Z-Elevator, Cooler & ScreenCools, screens and moves to baggingMatched to line
Why this process

Good for Farmers, Good for Business

🌱

Stops stubble burning

Crop residue earns money instead of polluting the air.

🔥

Clean fuel

Dense, uniform pellets replace coal in boilers and power plants.

⚡

Power-efficient

Matched machines mean no idle motors and lower cost per tonne.

🛠️

Made in Jaipur

In-house manufacturing, spare parts and service support.

FAQ

Process Questions

Can't find your answer? Call our sales team on +91 85059 02337.

Which raw materials can I use?

Paddy straw, wheat straw, mustard husk, sawdust, groundnut shell, cotton stalk and most other agro and wood residue. Tell us your material and we'll suggest the right configuration.

Do I need all five machines?

Not always. If your material is already small (like sawdust), you may skip shredding. Our configuration guide shows exactly which machines you need.

Is any binder or chemical added?

No. Heat and pressure in the ring die release the natural lignin in biomass, which binds the pellets.

What pellet sizes can the plant make?

TRIO ring die machines produce pellets from 6 mm to 16 mm — just change the die.

What capacity plant should I choose?

Single lines run from 1 to 4 tonnes per hour of pellets. Choice depends on raw material availability, power connection and budget — our team will help you size it.

Start your plant

Tell Us Your Raw Material. See Your Plant Configuration.

Get a plant layout, machine list and cost estimate made for your material and capacity.